US Local 1Set 990FT Range Dog Wireless Fence Remote Training Collar IPX6 Waterproof Receiver With 0-9 Levels Beep Vibration Shock Mode 4 Channels Rechargeable Transmitter System

DHL Shipping for single product purchasing. Multiple pack would be fedex shipping, for reference only,the actual shipping carrier would be depended by the location, address, package dimension, product category, geographic location.

*Features*:

• * 3 Training Functions with 0-9 Intensity Levels *: Our dog receive collar has 3 extremely efficient and safe training modes(beep,vibration and static shock modes) for you to cultivate a dog basic obedience commands and correct your dog?¡¥s inappropriate behaviors. The transmitter also features 4 channels to support training 4 dogs simultaneously. In case of dog?¡¥s accidently injury caused by improper intensity,the receiver collar delivers 0-9 beep,vibration and static shock levels(0 level means off) for you to adjust to fit your pet's personality. Please start from the lowest level for better accommodation.
• * Stable Wireless Dog Fence Mode *: Adopt advanced 2.4G frequency technology that consistently provides a more stable and accurate signal transmission from 50ft to 990ft than others. No complicatedly manual pairing operation, they will be automatically paired after power on, and one transmitter can connect with unlimited quantity of receiver collars. When your dog is out of range, the collar will trigger 5S sound, 5S vibration and 6S shock, after 2 cycles of this, we have ?¡ãdidi?¡À sound, emit until they return to the setting distance. After 5min of electric shock, it will enter to standby mode.
• * Rechargeable & Long Standby Time *: Built-in 2500mAh rechargeable battery of transmitter achieves 3-5days working after about 3-4hours fully charged. And 500mAh rechargeable collar enables up to 15days standby time(depends on using frequency) after about 1-2hours charging. Come with 2-in-1 type-c charging cable and adapter, can be conveniently charged via PC, phone charger, laptop, or power bank.
• * IPX6 Waterproof Collar Receiver *: With well-sealed silicone, the training collar emits IPX6 outstanding waterproof performance, offering your pets maximum flexibility during outdoor activities. Make sure that the charging port is well-sealed before the dog runs into water. Reflected strips on the collar make people see your dogs clearly even at night which effectively keep your dog safe.
• * Wide Applications *: The length of collar can be adjusted from 9.45in to 27.16in to fit most sizes of 6-month+ year old dogs between 15-120LBS. Soft woven fabric collar brings comfortable wearing experience. Smooth contact points with silicone caps rest gently against your pet's skin to deliver correction when needed.

Why does The System not Work?

1. The system has entered self-locking state. You can confrm this issue by looking at the top right corner of the display screen.

1) If you don't operate the unit for 1 minute, it will enter the self-locking state. If you want to operate again, you need to press the "+" and "-" keys at the same time to unlock, or it won't be operated.
2) After 5 minutes, it will automatically extinguish the screen without operation, and press any key to wake up.
3) For the code state and self-locking state, any key is useless, must be unlocked first, if the code state; Press the "CH" key for a long time to exit.

? ?

2. The colar and system is in low battery, needs to be charged.

3. The receiver has been totally immersed into water for a long time without the charging port well sealed. This will cause malfunction.

How can I know the system can work normally?

To ensure the system operates normally, follow these detailed testing steps after referring to the instruction video and user manual.?

Preparations : Fully charge the transmitter and receiver, then screw in the receiver's metal contact points (do not attach silicone caps).

1. Power On Devices

• Press the? Power Button ?on both the receiver and transmitter to turn them on.

2. Prevent Transmitter Self-Locking

• Ensure the transmitter does not enter self-locking mode during the test (refer to the manual for unlocking steps if triggered).

3. Enter Dog Training Mode

• Press the? Mode Button ?to switch to? Dog Training Mode .

4. Test Beep/Vibration Function (Pairing Check)

• Press the? Beep/Vibration Button , use the? +/- Buttons ?to set the intensity level, then press? Beep/Vibration Button ?again.
• Indicator of Success : If the receiver beeps or vibrates, it confirms successful pairing with the transmitter.

5. Test Shocking Function (with Test Bulb)

• Attach the test bulb to the receiver's metal contact points.
• Press the? Shock Button , adjust the level with? +/- Buttons , then press? Shock Button ?again.
• Indicator of Success : If the test bulb lights up, the shocking function is working properly.

6. Test Wireless Fence Mode (Radius Setting)

• In Dog Training Mode, press the? Mode Button ?again to switch to? Wireless Fence Mode .
• Use? +/- Buttons ?to set the radius, then place the transmitter in an open area (no obstacles between transmitter and receiver).
• Attach the test bulb to the receiver, carry the receiver, and walk away from the transmitter.
• Indicator of Success : As you walk towards the set radius, the receiver should first beep, then vibrate, and finally shock when crossing the radius.

Key Notes

• Obstacle-Free Environment : Ensure no objects block the signal between the transmitter and receiver, as this may disrupt communication.
• Test Bulb Requirement : Always use the test bulb when testing the shock function to avoid accidental stimulation.
• Refer to Manual : If issues arise, revisit the user manual and the instruction video.
• Friendly Reminder:
  1. Proper fit of the collar is important! A collar worn for too long or made too tight on the pet's neck may cause skin irritation. The receiver collar should fit snugly yet be sufficiently loose to allow one finger to fit between the strap and your pet?¡¥s neck.
  2. Please make sure to use the conductive silicone set, this will protect the dog's skin to a certain extent, but it does not affect the electric shock function.
  3. Avoid leaving the collar on the dog for more than 18 hours per day. If possible, reposition the collar on the pet's neck every 1 to 2 hours.
  4. We suggest not using the shock function except in an emergency. When using the shock function, Level 1 should be tried first and then the level should be gradually increased as necessary.
  5. If the collar is too long, please cut off the excessive portion. It is pretty easy to get a burn edge after the cut. Use a lighter to melt the burr edge.
  6. If your dog has thick hair on the neck, please use longer screw caps.
  7. Use the electric shock to test the bulb.

Actual Product Photo